LTP Crackle Glaze Protector

Product Description
Impregnating Sealer
For Interior use only
Suitable for ceramic tiles that have a porous crackle glaze.
Forms a clear colourless barrier. Helps protect porous tiles from penetration by water, dirt, oil, grease, limescale and other commonly found household contaminants. For use on crackle glaze tiles and grout joints. 
Directions for use
Ensure that the tile surface is clean and dry. Any tiles that are to be wet cut should be protected with at least one coat of sealer. Once the tiles have been fixed and before grouting apply one coat of sealer to the surface with a sponge or soft cloth and then buff immediately into the surface with a separate soft cloth. This should be done until all excess is removed. Leave for a minimum of two hours before grouting with normal grouts.
If coloured or pigmented grouts are used: Apply two coats and do not buff off excess. Leave for a minimum of 24 hours. Sponging off residual grout will remove excess sealer.
Once the grouting is dry (min 24hrs) apply a second coat of sealer to the surface also covering the joints. After 48 hours the surface can be cleaned as normal. Use a dry cloth to remove any excess from non-absorbent surfaces. Use only in well ventilated areas.
Drying Time: Approximately 30 – 40 minutes. Becomes fully effective after approximately 48 hours.
Use only in well ventilated areas. Do not breathe vapours.
Approximately 5 sq.m per 500ml (2 coats)
Maintain with LTP Stonewash or LTP Stonecare
1 unit = 1 x LTP Crackle Glaze Protector 500ml

Related Products