EVERBUILD All Purpose SILICONE SPRAY

Product Description

Everbuild Silicone Spray

Everbuild All Purpose Silicone Spray is a dry silicone lubricant and mould release agent for the easing of friction between two surfaces. Ideal for use in mould making/release industries, to ease installation of rubber and EPDM gaskets to window and door frames and has 100's of uses around the home, garage, workshop and industry.

ALL-PURPOSE SILICONE SPRAY will also enhance the appearance of vinyl and hard surfaces such as car dashboards etc, where the dry-bright finish will eliminate the need to polish.

 

Benefits of ALL-PURPOSE SILICONE SPRAY 

Enables friction to be reduced between most surfaces

Eliminates noise and squeak

Leaves a bright gloss finish to vinyl

ALL-PURPOSE SILICONE SPRAY meets BS6920 for use in contact with potable drinking water.

 

Areas For Use for ALL-PURPOSE SILICONE SPRAY  

Multitude of uses in the mould making and mould release industries

Making easy the installation of EPDM gaskets to window and doorframes.

Restoring the black gloss finish to car vinyl trim without the need for polishing

As a general high quality spray lubricant.

 

Limitations

Do not ingest. Pressurized container – Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn even after use. Do not spray on a naked flame or incandescent material. Test small area of surface to be coated for compatibility before use. As the manufacturer cannot know all the uses its products may be put to, it is the users responsibility to determine suitability of use. If in doubt, contact Technical Services Department for advice

 

Application of ALL-PURPOSE SILICONE SPRAY 

Shake the can and spray as required directly onto surface(s) to be lubricated. When used as a mould release agent, spray liberally onto mould and allow to dry.

COVERAGE: 120-250g/m²

 

1 unit = 1 x 400ml can

 

POLITE NOTICE: NO ROYAL MAIL OPTION AT CHECKOUT DUE TO ITEM BEING AN AEROSOL.

£2.99

Related Products