LTP Ironwax Satin - 1 litre

Product Description

LTP Ironwax Satin - Sealer is an easy to apply, low maintenance self-shine satin finish acrylic sealer.

LTP Ironwax Satin enhances colour and texture. Protects against staining and stubborn dirt. Easy to maintain. May be used on travertine, limestone, sandstone, slate, un-polished marble, terracotta, quarry, bricks, terrazzo and concrete Suitable for domestic and commercial use.

This product is suitable for interior use only (not wetrooms or shower enclosures).


To use you must ensure surface to be treated is completely clean, dry and free from cement and grout stain.  Any moisture in the floor may cause the LTP Ironwax Satin to dry opaque or prevent the seal from reaching full hardness. Using a sponge or soft fluff-free cloth, apply a thin coat of LTP Ironwax Satin evenly in one direction. Do not rub or buff the surface but allow to dry (approx 1 hour). Apply a second coat at right angles to the first. Subsequent coats should be applied at right angles to the previous. Do not over apply as too many coats may cause unsightly build up and/or reduce the efficiency of the product. Hardens after about an hour but will take a further three days to achieve full hardness and become fully water resistant. If in doubt, experiment on spare tiles to establish the optimum number of coats before general use.
 

Coverage: Approximately 15-30m2 per litre (one coat) depending on substrate porosity.

1 unit = 1 litre bottle

£12.30

Related Products