LTP Solvex 1 litre

Product Description

LTP Solvex is a high Performance Remover suitable for Wax , Silicone, Acrylic, Polyurethane Sealers and Residual Epoxy Grout For Stone, Travertine, Terracotta, Slate, Sandstone, Flag-stones, Quarry Tiles, Glazed Ceramic and Porcelain . A powerful non-caustic stripper that softens most types of surface sealer, which can then be removed with ease. Suitable for removing most wax, oil, silicone, acrylic, polyure-thane sealers and residual epoxy grout.. After washing and rinsing, surfaces are ideal for re-sealing.

High performance remover.
Removes Wax & Silicone
Also Acrylic & Polyurethane Sealers.
And Residual Epoxy Grout.
A powerful non-caustic stripper.
Directions for Use:-
Open the container and pour into a glass or metal container (not plastic). Apply generously by dabbing on with a cloth or brush. Work in manageable areas of no more than 5 sqmetre and do not brush out. Leave for approximately 30minutes to ensure good penetration, but do not allow the solution to dry out. If drying should occur within 30 minutes apply a little more solution. Use a course, stiff brush or abrasive pad to remove softened coating from the surface. Repeat the process if unwanted material remains. Wash down with a dilute solution of LTP Grimex, rinse with plenty of water and leave to dry (min 24hrs) before re-sealing. Use natural fibre brushes to remove residues. Brushes made from synthetic fibres may be damaged by this product. If you are unsure of correct application methods, test on an inconspicuous area, prior to general application. If removing residues from epoxy grout; apply making sure to avoid prolonged contact with the joint as well.  Viscous solution should not drip if used on vertical surfaces. Protect acrylic surfaces such as baths and shower trays from contact.
Light Stripping 8-10m²/litre
Deep Stripping 5m²/litre
1 unit = 1 x LTP Solvex 1 litre

Related Products