Supergrip tile adhesive 10L tubs x 112 FREE DELIVERY Mainland UK

Product Description



SUPERGRIP is a ready mixed high grab acrylic wall tile adhesive. Ideal for standard and large format ceramic wall tiles, also suitable for use with
porcelain mosaics, glass and natural stones. NB: When using larger format non-porous tiles like porcelain and glass, drying times will be substantially
increased, in these instances we would recommend the use of a S1 or S2 cementitious adhesive from the Granfix range.
SUPERGRIP has been specially formulated for its non-slip, high grab properties, which allow the speedy application of large format tiles. The
product is suitable for intermittently wet conditions i.e. domestic showers, kitchens and bathrooms. It is not recommended for exterior use
or areas subjected to immersion such as swimming pools.

Ensure all areas are clean, dry and free from dust or any other contaminating barriers. Remove any flaking or peeling layers.
Plaster: Tile only onto a finished coat. Leave new plaster for at least 4 weeks in order for it to be strong enough to support the tiling weight.
Total weight of tile and adhesive should not exceed 20kg/m².
Cement/Sand Render: Leave new surfaces to dry out for at least 2
weeks before tiling.
Brickwork/Concrete: Leave new surfaces to dry out for at least 4 weeks.
Plasterboard/Fibre-reinforced Cement Sheets: Boards should be braced and screwed horizontally and vertically at 300mm centres.
Domestic Showers: Ensure 100% solid bed coverage is achieved. Do not
leave voids as this will trap water and cause adhesive failure.
Tile on Tile: Will fix porous tiles to existing ceramic tiles. Please note
that existing surfaces should be prepared in accordance with our surface
preparation guidelines. For best results abrade the surface to form a key.

Apply adhesive to the surface by use of a notched trowel. Bed tiles in firmly with a slight twisting action. Clean off excess adhesive from the tile
face with a damp cloth and rake excess from the grout lines before it sets. Leave for a minimum of 24 hours before grouting (on impervious or
sealed surfaces longer time will be required). Do not apply more than 1m² of adhesive before tiling commences, as skinning may occur. If skinning
does occur it can affect the bond. Maximum bed thickness is 3mm, achieved by using a 6mm by 6mm notched trowel. Spot bonding is not
Note: All tiling should follow the correct British/European Standard and incorporate movement joints therein.

Tools should be thoroughly cleaned in water to remove excess material
immediately after use.

1 unit = 112 tubs of Granfix (Instarmac) Supergrip 10L


Delivery to offshore UK (Northern IrelandScottish Islands, Isle of Man, Isle of Wight, Channel Islands, Scilly Isles) will incur a delivery charge, please email for cost details in advance of purchase.


Please note this product will be delivered by a large vehicle and will require a signature.   Redelivery may incur a charge.



Related Products