Tilemaster Anti-Fracture Mat - 1 x 20m roll

Tilemaster Anti-fracture Mat is an anti-fracture / uncoupling matting designed for use on floor tile installations where there is a need to absorb and accommodate limited lateral movement. 

 

Tilemaster Anti-fracture Mat can be used in a wide range of applications in order to accommodate the lateral movement from substrates and also bridge stress / shrinkage cracking therefore preventing movement being transferred to the tiled finish. The matting can be used when installing a large variety of tiles including ceramic, porcelain and natural stone tiles. Tilemaster anti-fracture Mat is ideal for domestic and commercial applications in light, medium and heavy duty environments.

 

ADVANTAGES:

 

Three layer anti-fracture/uncoupling mat designed to accommodate & absorb lateral movement in sub-floors

Genuine fast-track system – can be tiled over immediately after fitting the mat

Only 0.85mm thick & minimises height build-up

Ideal for plywood / chipboard overlay and T & G floorboards

Ideal for underfloor heating systems

Use below ceramic, porcelain & natural stone tiles

Easy to install – simply cut & place

 

SURFACE / SUBSTRATE:

 

Sand/Cement Screed Concrete Plywood Overlay Chipboard Overlay Electric Underfloor Heating Water/Wet System Underfloor Heating Tile Backer Boards Tile on Tile Flooring Grade Asphalt & Bitumen Anhydrite Screeds Fibre Cement Sheet T & G Floorboards Floating Floors Existing Vinyl Tiles Steel/Metal Surfaces Fibreglass

 

This product can be sold in lengths to order and is cut from a 20m roll.       If you require enough matting for a 10sqm area (for example) then you would need to buy 10 quantity of a single sqm listing which is listed separately to this item.    

 

This listing is for 1 x 20metre roll.  Width = 1m.

 

For more information click here

 

1 unit = 1 x 20m roll of Tilemaster Anti-fracture Mat.